HYDRAULIC DIVISION +91-80-29544155
Logo
NNF TECH TM

Materials

We offer a wide range of materials that can cater to your specific needs. Below is list of materials along with their chemical composition, mechanical property values & density. Special grade materials are offered on-request.

Material Data Sheet

pdfDownload Material Data Sheet

Material>>> SS 17-4PH 42CrMo4 16Mo Cr5 100 Cr6 SS 310 N SS 304 SS 316L SS 420 W 1010 4605 4340 8620 8740 FeSi3 FN02 FN08 FN0205 M2 P.A.N.A.C.E.A.
Chemical Compositions C (%) ≤ 0.07 0.35 – 0.45 0.14 – 0.19 0.80 – 1.05 0.20 – 0.50 ≤ 0.06 ≤ 0.60 0.35 – 0.50 ≤ 0.15 0.4 – 0.6 0.35 – 0.45 0.12 – 0.23 0.45 – 0.55 ≤ 0.10 ≤ 0.10 0.4 – 0.6 0.4 – 0.6 0.95 – 1.05 ≤ 0.2
Cr (%) 15 –17.5 0.90 – 1.20 0.80 – 0.11 1.35 – 1.65 24 – 26 17 – 20 16 – 18 12 – 14 - - 0.60 – 0.90 0.40 – 0.60 0.40 – 0.60 - - - - 3.80 – 4.50 16.5 – 17.5
Ni (%) 3 – 5 - - - 19 – 22 8 – 11 10 – 14 ≤ 0.60 - 1.5 – 2.5 1.65 – 2.00 0.40 – 0.70 0.50 – 0.80 - 1.9 – 2.2 7.5 – 8.5 1.9 – 2.2 - -
Cu (%) 3 – 5 - - - - - - - - - - - - - - - - - -
Nb (%) 0.15 – 0.45 - - - 1.2 – 1.5 - - 1.0 – 2.0 - - - - - - - - - - -
Mn (%) ≤ 1 - 0.10 – 1.30 - ≤ 1.5 ≤ 2 ≤ 2 ≤ 1.0 0.3 – 0.66 - - - - - - - - - 10 – 12
Si (%) ≤ 1 - < 0.50 - 0.75 – 1.30 ≤ 1 ≤ 1 ≤ 1.0 ≤ 0.4 ≤ 1.0 - - - 2.5 – 3.0 - - - - ≤ 1
Mo (%) - 0.15 – 0.30 - - - - 2 – 3 ≤ 0.65 - 0.2 – 0.5 0.2 – 0.3 0.15 – 0.25 0.25 – 0.40 - - - - 4.50 – 5.50 3.0 – 3.5
P (%) - - < 0.035 - - - - ≤ 0.040 ≤ 0.045 - - - - - - - - - -
S (%) - - < 0.035 - - - - ≤ 0.030 ≤ 0.045 - - - - - - - - - -
N (%) - - - - - - - - - - - - - - - - - - 0.75 – 0.90
W (%) - - - - - - - - - - - - - - - - - 5.50 – 6.75 -
V (%) - - - - - - - - - - - - - - - - - 1.75 – 2.20 -
Other (%) - - - - ≤ 2.0 - - - - - - - - - - - - - -
Fe (%) Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance Balance
Density ≥ 7.55 g/cm3 ≥ 7.40 g/cm3 ≥ 7.40 g/cm3 7.50 g/cm3 ≥ 7.60 g/cm3 ≥ 7.7 g/cm3 ≥ 7.8 g/cm3 ≥ 7.55 g/cm3 ≥7.5 g/cm3 ≥ 7.5 g/cm3 ≥ 7.50 g/cm3 ≥ 7.4 g/cm3 ≥ 7.5 g/cm3 ≥ 7.5 g/cm3 ≥ 7.5 g/cm3 ≥ 7.5 g/cm3 ≥ 7.5 g/cm3 ≥ 7.8 g/cm3 ≥ 7.5 g/cm3
Yield Strength(YS) As Sintered 700 Mpa ≥ 370 Mpa ≥ 270 Mpa ≥ 450 Mpa ≥ 410 MPa ≥ 140 MPa ≥ 160 Mpa ≥ 590 Mpa ≥ 190 Mpa ≥ 360 Mpa ≥ 450 Mpa ≥ 360 Mpa ≥ 480 Mpa ≥ 300 Mpa ≥ 120 Mpa ≥ 370 Mpa ≥ 150 Mpa ≥ 750 Mpa ≥ 630 Mpa
Heat Treated ≥ 900 Mpa ≥ 1190 MPa ≥ 560 Mpa - - - - - - 1030 Mpa ≥ 1190 Mpa - ≥ 1320 MPa - - ≥ 1050 Mpa ≥ 660 MPa - -
Ultimate Tensile Strength(UTS) As Sintered 910 Mpa ≥ 610 Mpa ≥ 350 MPa ≥ 840 Mpa 750 Mpa ≥ 560 Mpa ≥ 450 Mpa ≥ 740 MPa ≥ 360 Mpa ≥ 550 Mpa ≥ 630 MPa ≥ 610 Mpa ≥ 800 Mpa ≥ 500 Mpa ≥ 230 Mpa ≥ 650 Mpa ≥ 340 Mpa ≥ 1140 Mpa ≥ 1030 Mpa
Heat Treated ≥ 1050 Mpa ≥ 1380 MPa ≥ 1010 Mpa - - - - ≥ 1480 Mpa - 1240 Mpa ≥ 1400 Mpa - ≥ 1520 MPa - - ≥ 1180 MPa ≥ 760 MPa - -
Elongation As Sintered 6% ≥ 3 % 15 % ≥ 5 % 16 % ≥ 60 % ≥ 50 % ≥ 0.97 % ≥ 26 % ≥ 5 % ≥ 7 % ≥ 3 % ≥ 8 % ≥ 20 % ≥ 25 % ≥ 3 % ≥ 3 % ≥ 1 % ≥ 35 %
Heat Treated ≥ 5 % ≥ 2 % 8 % - - - - ≥ 0.85 % - ≥ 5 % ≥ 2 % - ≥ 5 % - - ≥ 3 % ≥ 5 % - -
Hardness As Sintered ≤ 32 HRC 100 – 230 HV10 ≥ 110 HV 180 – 290 HV10 210 HV1 130 HV10 110 HV10 ≥ 560 HV1 - ≥ 120 HV10 170 – 250 HV10 150–230 HV10 140–210 HV10 120–160 HV1 70–110 HV10 130–280 HV10 100–150 HV10 ≥ 48 HRC 220–300 HV10
Heat Treated ≥ 37 HRC ≥ 40 HRC ≥ 36 HRC ≥ 55 HRC - - - ≥ 680 HV1 630 HV1 ≥ 40 HRC ≥ 42 HRC ≥ 575 HV1 ≥ 460 HV1 - ≥ 49 HRC ≥ 38 HRC 300 HV10 ≥ 58 HRC -
DIN Equivalent 1.4542 1.7225 1.7131 1.3505 1.4848 1.4301 1.4404 1.4028 - - 1.6565/1.6944, 40NiCrMo6 1.6523 1.6546 1.0884 - - - 1.3342 -
AISI Equivalent S17400 4140 16MoCr5 E52100 - 304 316L 420F 1010 - 4340 8620 8740 - - - - M2 (high C) -

QUICK LINKS

SOCIAL MEDIA

CERTIFIED BY

CONTACT US

+91-80-29544155
info@n-mim.com

LOCATION

SY. No. 132, Ground Floor, Kumbalgodu Industrial Area,
Mysore Road, Kengeri,
Bangalore - 560074,
Karnataka, India

© Copyright , All Rights Reserved

Powered By Swaragh